Module:Arguments/Documentation

Ce module fournit un ensemble de fonctions utiles à la gestions des arguments passés avec #invoke, entre les modules et modèles. Il s’agit d’un meta-module susceptible de servir à d’autre modules, il ne doit pas être appelé directement par #Invoke

Le module propose :

• Suppressions des espaces dans les arguments et suppression des arguments vides.
• Les arguments peuvent provenir de l’objet frame courant et de l’objet frame parent, simultanément. (Voir plus de détails ci-dessous.)
• Les arguments peuvent être reçus directement depuis un autre module Lua, ou depuis la console debug.
• Les arguments sont rapportés comme il se doit, ce qui évite d’eventuels problèmes avec les marqueurs de références <ref>…</ref>.
• La plupart des fonctions peuvent être personnalisées.

Usage Basique

En premier lieu, vous devez charger le module, il contient une fonction nommée getArgs.

local getArgs = require('Module:Arguments').getArgs

Le scénario classique consiste à utilser getArgs dans votre fonction principale. La variable args est une table, contenant les arguments depuis #invoke. (Voir les détails ci-dessous).

local getArgs = require('Module:Arguments').getArgs
local p = {}

function p.main(frame)
	local args = getArgs(frame)
	-- Ici, le code de la fonction principale du module .
end

return p

La pratique recommandée consiste à utiliser une fonction uniquement pour traiter les arguments depuis #invoke. Cela signifie que si quelqu’un appel votre module depuis un autre module Lua, vous n’avez pas besoin d’avoir un objet frame disponible, ceci améliore les performances.

local getArgs = require('Module:Arguments').getArgs
local p = {}

function p.main(frame)
	local args = getArgs(frame)
	return p._main(args)
end

function p._main(args)
	-- Ici, le code principal du module.
end

return p

Si vous voulez que diverses fonctions puissent utiliser les arguments, tout en restant accessibles depuis #invoke, vous devez utiliser un wrapper c'est-à-dire une fonction d’encapsulation.

local getArgs = require('Module:Arguments').getArgs

local function makeInvokeFunc(funcName)
	return function (frame)
		local args = getArgs(frame)
		return p[funcName](args)
	end
end

local p = {}

p.func1 = makeInvokeFunc('_func1')

function p._func1(args)
	-- Code for the first function goes here.
end

p.func2 = makeInvokeFunc('_func2')

function p._func2(args)
	-- Code for the second function goes here.
end

return p

Options

Les options suivantes sont disponibles, elles sont expliquées ci-dessous.

local args = getArgs(frame, {
	trim = false,
	removeBlanks = false,
	valueFunc = function (key, value)
		-- Code for processing one argument
	end,
	frameOnly = true,
	parentOnly = true,
	parentFirst = true,
	wrappers = {
		'Template:A wrapper template',
		'Template:Another wrapper template'
	},
	readOnly = true,
	noOverwrite = true
})

Trimming and removing blanks

Blank arguments often trip up coders new to converting MediaWiki templates to Lua.

Selon la syntaxe des modèles, les chaines vides et chaines contenant uniquement des espaces sont considérés comme "faux". Cependant selon Lua, les chaines vides et chaines contenant uniquement des espaces sont considérés comme "vrai". Ceci signifie que si vous ne faites pas attention à de telles situations, vous risquez de traiter comme "vrai" quelque chose qui devrait être considéré comme "faux". Pour éviter cette confusion, le module supprime (par défaut), tous les arguments vides.

De la même façon les espaces peuvent causer des problèmes lors de l’utilisation d’arguments positionnels. Si les espaces inutiles sont supprimés lors du traitement d’argument nommé, ils sont préservés pour les arguments positionnés. Le plus souvent cet espace additionnel est indésirable ; donc ce module le supprime par défaut.

Malgré tout, parfois vous pouvez avoir besoin d’utiliser un argument "blanc" comme donnée, et d’autres fois vous avez besoin de laisser un espace additionnel. Cela peut être utile pour convertir certains modèles exactement comme ils ont été écris. Dans ces cas de figure, vous pouvez configurer les arguments trim et removeBlanks comme false.

local args = getArgs(frame, {
	trim = false,
	removeBlanks = false
})

Custom formatting of arguments

Sometimes you want to remove some blank arguments but not others, or perhaps you might want to put all of the positional arguments in lower case. To do things like this you can use the valueFunc option. The input to this option must be a function that takes two parameters, key and value, and returns a single value. This value is what you will get when you access the field key in the args table.

Example 1: this function preserves whitespace for the first positional argument, but trims all other arguments and removes all other blank arguments.

local args = getArgs(frame, {
	valueFunc = function (key, value)
		if key == 1 then
			return value
		elseif value then
			value = mw.text.trim(value)
			if value ~= '' then
				return value
			end
		end
		return nil
	end
})

Example 2: this function removes blank arguments and converts all arguments to lower case, but doesn't trim whitespace from positional parameters.

local args = getArgs(frame, {
	valueFunc = function (key, value)
		if not value then
			return nil
		end
		value = mw.ustring.lower(value)
		if mw.ustring.find(value, '%S') then
			return value
		end
		return nil
	end
})

Note: the above functions will fail if passed input that is not of type string or nil. This might be the case if you use the getArgs function in the main function of your module, and that function is called by another Lua module. In this case, you will need to check the type of your input. This is not a problem if you are using a function specially for arguments from #invoke (i.e. you have p.main and p._main functions, or something similar).

Modèle:Cot Example 1:

local args = getArgs(frame, {
	valueFunc = function (key, value)
		if key == 1 then
			return value
		elseif type(value) == 'string' then
			value = mw.text.trim(value)
			if value ~= '' then
				return value
			else
				return nil
			end
		else
			return value
		end
	end
})

Example 2:

local args = getArgs(frame, {
	valueFunc = function (key, value)
		if type(value) == 'string' then
			value = mw.ustring.lower(value)
			if mw.ustring.find(value, '%S') then
				return value
			else
				return nil
			end
		else
			return value
		end
	end
})

Also, please note that the valueFunc function is called more or less every time an argument is requested from the args table, so if you care about performance you should make sure you aren't doing anything inefficient with your code.

Frames and parent frames

Arguments in the args table can be passed from the current frame or from its parent frame at the same time. To understand what this means, it is easiest to give an example. Let's say that we have a module called Module:ExampleArgs. This module prints the first two positional arguments that it is passed.

local getArgs = require('Module:Arguments').getArgs
local p = {}

function p.main(frame)
	local args = getArgs(frame)
	return p._main(args)
end

function p._main(args)
	local first = args[1] or ''
	local second = args[2] or ''
	return first .. ' ' .. second
end

return p

Module:ExampleArgs is then called by Template:ExampleArgs, which contains the code {{#invoke:ExampleArgs|main|firstInvokeArg}}. This produces the result "firstInvokeArg".

Now if we were to call Template:ExampleArgs, the following would happen:

Code	Result
{{ExampleArgs}}	firstInvokeArg
{{ExampleArgs|firstTemplateArg}}	firstInvokeArg
{{ExampleArgs|firstTemplateArg|secondTemplateArg}}	firstInvokeArg secondTemplateArg

There are three options you can set to change this behaviour: frameOnly, parentOnly and parentFirst. If you set frameOnly then only arguments passed from the current frame will be accepted; if you set parentOnly then only arguments passed from the parent frame will be accepted; and if you set parentFirst then arguments will be passed from both the current and parent frames, but the parent frame will have priority over the current frame. Here are the results in terms of Template:ExampleArgs:

frameOnly

Code	Result
{{ExampleArgs}}	firstInvokeArg
{{ExampleArgs|firstTemplateArg}}	firstInvokeArg
{{ExampleArgs|firstTemplateArg|secondTemplateArg}}	firstInvokeArg

parentOnly

Code	Result
{{ExampleArgs}}
{{ExampleArgs|firstTemplateArg}}	firstTemplateArg
{{ExampleArgs|firstTemplateArg|secondTemplateArg}}	firstTemplateArg secondTemplateArg

parentFirst

Code	Result
{{ExampleArgs}}	firstInvokeArg
{{ExampleArgs|firstTemplateArg}}	firstTemplateArg
{{ExampleArgs|firstTemplateArg|secondTemplateArg}}	firstTemplateArg secondTemplateArg

Notes:

1. If you set both the frameOnly and parentOnly options, the module won't fetch any arguments at all from #invoke. This is probably not what you want.
2. In some situations a parent frame may not be available, e.g. if getArgs is passed the parent frame rather than the current frame. In this case, only the frame arguments will be used (unless parentOnly is set, in which case no arguments will be used) and the parentFirst and frameOnly options will have no effect.

Wrappers

The wrappers option is used to specify a limited number of templates as wrapper templates, that is, templates whose only purpose is to call a module. If the module detects that it is being called from a wrapper template, it will only check for arguments in the parent frame; otherwise it will only check for arguments in the frame passed to getArgs. This allows modules to be called by either #invoke or through a wrapper template without the loss of performance associated with having to check both the frame and the parent frame for each argument lookup.

For example, the only content of Template:Side box (excluding content in Modèle:Tag tags) is {{#invoke:Side box|main}}. There is no point in checking the arguments passed directly to the #invoke statement for this template, as no arguments will ever be specified there. We can avoid checking arguments passed to #invoke by using the parentOnly option, but if we do this then #invoke will not work from other pages either. If this were the case, the |text=Some text in the code {{#invoke:Side box|main|text=Some text}} would be ignored completely, no matter what page it was used from. By using the wrappers option to specify 'Template:Side box' as a wrapper, we can make {{#invoke:Side box|main|text=Some text}} work from most pages, while still not requiring that the module check for arguments on the Template:Side box page itself.

Wrappers can be specified either as a string, or as an array of strings.

local args = getArgs(frame, {
	wrappers = 'Template:Wrapper template'
})

local args = getArgs(frame, {
	wrappers = {
		'Template:Wrapper 1',
		'Template:Wrapper 2',
		-- Any number of wrapper templates can be added here.
	}
})

Notes:

1. The module will automatically detect if it is being called from a wrapper template's /sandbox subpage, so there is no need to specify sandbox pages explicitly.
2. The wrappers option effectively changes the default of the frameOnly and parentOnly options. If, for example, parentOnly were explicitly set to false with wrappers set, calls via wrapper templates would result in both frame and parent arguments being loaded, though calls not via wrapper templates would result in only frame arguments being loaded.
3. If the wrappers option is set and no parent frame is available, the module will always get the arguments from the frame passed to getArgs.

Writing to the args table

Sometimes it can be useful to write new values to the args table. This is possible with the default settings of this module. (However, bear in mind that it is usually better coding style to create a new table with your new values and copy arguments from the args table as needed.)

args.foo = 'some value'

It is possible to alter this behaviour with the readOnly and noOverwrite options. If readOnly is set then it is not possible to write any values to the args table at all. If noOverwrite is set, then it is possible to add new values to the table, but it is not possible to add a value if it would overwrite any arguments that are passed from #invoke.

Ref tags

This module uses metatables to fetch arguments from #invoke. This allows access to both the frame arguments and the parent frame arguments without using the pairs() function. This can help if your module might be passed Modèle:Tag tags as input.

As soon as Modèle:Tag tags are accessed from Lua, they are processed by the MediaWiki software and the reference will appear in the reference list at the bottom of the article. If your module proceeds to omit the reference tag from the output, you will end up with a phantom reference - a reference that appears in the reference list, but no number that links to it. This has been a problem with modules that use pairs() to detect whether to use the arguments from the frame or the parent frame, as those modules automatically process every available argument.

This module solves this problem by allowing access to both frame and parent frame arguments, while still only fetching those arguments when it is necessary. The problem will still occur if you use pairs(args) elsewhere in your module, however.

Known limitations

The use of metatables also has its downsides. Most of the normal Lua table tools won't work properly on the args table, including the # operator, the next() function, and the functions in the table library. If using these is important for your module, you should use your own argument processing function instead of this module.